- Wet Room Shower Tray Kit – SQUARE DRAIN
- Available In Multiple Sizes – Offset & Central Drain Position
- 4 Stylish Drain Options Available
- Suitable For Domestic & Commercial Use
- Safe & Easy To Handle / Cut To Size
- Lifetime Guarantee
- Decreases Heat Loss
- Ideal For Shower Wet Rooms
- Can Be Used With Electric UFH
- 100% Waterproof With Tanking Tape & External / Internal Corners
- Compatible With Tile Backer & Fibre Cement Boards
- ‘Fast Flow’ Waste Trap Drain Included
- Next Working Day Delivery Service
Wet Room Shower Tray Kit – SQUARE DRAIN
Walk-In Rectangular Tray Former
The Roma Heating Rectangular Tray Former with square drain, ideal for sleek, modern wet room domestic & commercial installations.
Designed for use under tiles, it is best installed with Tile Backer Boards or Fibre Cement Boards for added strength and insulation.
Suitable for concrete and over-ply timber sub floors, it features a built-in slight gradient/fall for fast and efficient drainage.
Each tray comes with a waste trap and your choice of drain style (4 finishes available).
All Roma Shower trays are compatible with 150W & 200W Roma Heat Mats & Loose Wire Underfloor Heating (UFH) Systems.
Key Features:
- 20-30mm Depth
- Square Or Rectangular Shape
- XPS Foam Core – Reinforced With Fibreglass & Cement Mortar
- Square Drain – Central Or Offset Position
- Waterproof & Ready For Tiling
- Lightweight & Insulated
- Suitable For All Tile Sizes
- Level Access Installation
- Factory Sealed Drain
- Can Be Trimmed To Size
- Suitable For Domestic & Commercial Use
- Easy installation
Need Help?
If you have any questions, our friendly team at Roma is happy to help.
📞 Call us on 01803 316131
📧 Email: sales@romaheating.co.uk


A tileable wet room shower tray kit with a square drain, central or offset, for a level access, walk-in shower: a tray former with the fall built in and the drain factory sealed in, a Fast Flow waste trap and a choice of four square drain grates. 1000 x 1000 and 1250 x 1000mm at 20mm deep, 1500 x 1000 and 1500 x 1200mm at 30mm deep. Tile straight over it with any tile size, mosaic included. Lifetime guarantee, in stock for next working day delivery, with trade pricing for account holders.
Specification: square or rectangular; drain central or offset; XPS foam core reinforced with fibreglass mesh, coated in cement mortar with a key finish; waterproof and ready for tiling; domestic and commercial; concrete or over-ply timber subfloors.
Fitting the tray
Bedding and cutting
Bed the tray fully on a good flexible tile adhesive, drain edges and outer edges included. It can be cut down to fit, but no cut edge may come within 150mm of the drain.
View adhesivesTiling
Keep the fall to the drain, and finish the tiles flush with or just above the grate. Cover the drain and grate while tiling and grouting.
Linear drain versionTanking and heating
Fix tile backer boards around the tray, washers at no more than 400mm centres and at least 12 per board. Tape every joint, lower joints first working away from the drain, with corners sealed. Roma mats and loose wire can go over the tray, but not over the drain.
View tanking tapeSquare drain shower tray questions the trade asks us
Is it suitable for level access and wheelchairs?
Yes. It gives a level, walk-in shower floor, and once tiled it can take shower seats and wheelchairs.
Which depth do I get?
It depends on the size: 1000 x 1000 and 1250 x 1000mm are 20mm deep; 1500 x 1000 and 1500 x 1200mm are 30mm deep.
Can the tray be cut down?
Yes, to suit the shower area, as long as no cut edge comes within 150mm of the drain. Or extend the area with tile backer boards.
Can underfloor heating go over it?
Yes. Roma 150W and 200W mats and loose wire heating can be laid directly over the tray, as long as nothing obstructs the drain.
Need a size that is not listed here?
The linear drain tray comes in 13 sizes from 800 x 800mm to 1200 x 1500mm, including 1200 x 1200mm. For a development or a run of bathrooms, trade accounts can ask us for project pricing.




















